Home > All Brands > TAMIYA > DF-03
Sort By:
Page of 2
Tamiya TRF Damper Shaft Guide Grooved 4pcs 84292

Usable With:

  • Tamiya TRF Damper
  • DF-03 Aluminum Damper Set
  • M-Chassis Aluminum Damper Set
  • Hotshot (2007)
  • Avante (2011)

Spec:

  • Inner Diameter: 2.8mm
  • Outer Diameter: 6.54mm
  • Thickness: 2.1mm

Front One-Way unit and associated link gear Option Parts for use with the DF-03 chassis. The One-Way Unit is an essential modification that will lock in place during acceleration, minimizing power loss and increasing cornering speed.
*Compatible Chassis: DF-03


These precision-made polyacetal (POM) damper pistons offer
different diameter piston holes to provide drivers with the options to create
more detailed suspension settings. Note: These pistons cannot be used with CVA
or TRF dampers.

Use this one-piece propeller cup joint in place of kit standard parts to improve transmission efficiency. Connection point with propeller shaft features TRF415MSX Y Part ( 53890 Swing Shaft Protector ) to reduce wear and tear. Features stylish blue aluminum finish, can be used to replace front or rear propeller cup joints.

*When used on rear, the parts cannot be used with 53931 (DF-03 Center One-Way Set)

Compatible chassis: DF-03, DF-03 RA


  • Blue Turnbuckle Wrench.
  • For Car with 3mm Turnbuckle Shaft.
  • It usually can fit all tamiya car Turnbuckle.

3x42mm hard turnbuckle shafts can be used to replace the DT-02 chassis' rear upper arm.
* Compatible chassis: DT-02

This polycarbonate material buggy racing wing is compatible with a wide range of buggy chassis. It may be used on the TRF201, DB-01, DB-02, TRF502X, DN-01, DF-03, DT-02 and TT-02B chassis. It may be cut into different sizes depending on the track layout and the desired wing effects.

Suitable for the following cars - HB Cyclone/S/D4 (with HPI/HB Diff Screw), Serpent S400, Top Scythe (Optional Alum. Ball Diff), Tamiya Cars (TRF415, TA05, TA04, TB02, TB Evo III/IV/V, TRF501X, DF03, TRF414, F201)

Developed with German National Champion and World Championship A Finalist Ronald Völker, the use of Ceramic Diff Balls with the thrust bearing's design proves to facilitate ultra smooth diff action and durability over conventional thrust bearings. You will no longer need to rebuild your thrust bearing again when rebuilding your diff, simply clean it thoroughly with motor spray and apply moderate amounts of thrust bearing grease before assembling it to the differential.

Tip: Try to apply as much Thrust Bearing Grease as possible completely covering each diff ball.

Aluminum turnbuckle rod for the DF-03 steering rod that connects to the servo.
* Compatible chassis: DF-03

Turnbuckle shafts designed for 1:10 off-road buggy. Using turnbuckle shafts allows setting adjustment without removing upper arms and steering tie-rod, by simply rotating shafts. Hard and durable shafts can stand up to the rigors of off-road racing. Bright blue aluminum coloring adds to eye appeal.

Wheel Axles for TA04 Style Universal Shaft. Fit on TT01 Universal as well.

  • This is a low mounting wing set for DB01 chassis machines.
  • This rear wing offers a 6mm lower rear wing setting than previous wings.
  • This new wing set offers a lower center of gravity for your machine while still producing plenty of down force.
  • Can be used on any DB01 and DF-03 chassis machines.
  • Can also be used on TRF501X and TRF511 chassis machines.

This option parts set includes 3 silver-anodized aluminum
heat-sink bars and a gearbox plate. These heat sink bars can be bolted to item
92232 M-05 aluminum motor plate to further dissipate heat from the
motor.

Optional damper springs for use with Dark Impact (DF-03)
*Compatible chassis: DF-03

These tires feature new tread pattern and are designed for superb control on high-traction on-road and off-road tracks. The tires are designed for use with off road buggies such as the DB-01 and DF-03 chassis. Please note the "K" denotes kit standard.

Specs & Features

  • These tires are kit standard for DF-03 and DB-01 chassis kits.
  • Ideal for using on high traction track surfaces.
  • 54186 Rear tires can be used with 2WD off-road buggies such as DT-02 chassis kits.
  • Tires x 2pcs. included.
  • Foam x 2pcs. included.
  • Item 54185 Front tires are compatible with 62mm (diameter) / 25mm (width) wheels such as Item 53880 Large Dish Wheels (4WD/Front, 62/25).
  • Item 54186 Rear tires are compatible with 62mm (diameter) / 35mm (width) wheels such as Item 53881 Large Dish Wheels (Rear, 62/35).

  • Major for DF-03 Chassis.
    The Top Damper Cap same as the Clear Damper Cap comes with M03R.
    Limited edition Option Parts for the off-road DF-03 chassis 49435 = blue version of ITEM 58370 V,X,W, and Y Parts

    These tires feature new tread pattern and are designed for excellent grip for off-road tracks. The tires are designed for use with off road buggies such as the DB-01 and DF-03 chassis. Please note the "C" denotes competition level tires.

    Specs & Features

  • Ideal for using on hard off-road track surfaces.
  • 54188 Rear tires can be used with 2WD off-road buggies such as DT-02 chassis machines.
  • Tires x 2pcs. included.
  • Foam x 2pcs. included.
  • Item 54187 Front tires are compatible with 62mm (diameter) / 25mm (width) wheels such as Item 53880 Large Dish Wheels (4WD/Front, 62/25).
  • Item 54188 Rear tires are compatible with 62mm (diameter) / 35mm (width) wheels such as Item 53881 Large Dish Wheels (Rear, 62/35).

  • Hard turnbuckle set for the DF-03 chassis. The set features four 3x50mm turnbuckle shafts for the camber links and two 3x46mm turnbuckle shafts for the steering.
    * Compatible chassis: DF-03