Home > All Brands > TAMIYA > TRF416 / TRF416X
Tamiya TRF416 Parts
Sort By:
Page of 4
Tamiya TRF Short Damper Spring Extra Hard 2pcs 53633 Tamiya TRF Short Damper Spring Soft 2pcs 53630 Tamiya Silver Coil Spring 2pcs 9805699
This is the pair of Tamiya Silver Coil Spring.
Spring Rate is between the Blue and Yellow Springs from Tamiya 53440 ON-ROAD Tuned Hard Spring Set.

This is the pair of Tamiya Silver Coil Spring.

Spring Rate is between the Blue and Yellow Springs from Tamiya 53440 ON-ROAD Tuned Hard Spring Set.

Tamiya TRF Damper Oil Seal 4pcs 53576 Tamiya 5mm Ball Connector for 43514 4pcs 9804205 Tamiya TRF Damper Shaft Guide Grooved 4pcs 84292
These damper oil seals are direct replacements for Tamiya TRF touring car dampers. Racer Tip: Adding o-rings or foam bushings between the rubber oil seal and plastic damper cap will yield different damping effects. No Original Packaging.

Usable with:
43514 Buggy Nitro Thunder NDF01.

Usable With:

  • Tamiya TRF Damper
  • DF-03 Aluminum Damper Set
  • M-Chassis Aluminum Damper Set
  • Hotshot (2007)
  • Avante (2011)

Spec:

  • Inner Diameter: 2.8mm
  • Outer Diameter: 6.54mm
  • Thickness: 2.1mm
Tamiya Ultra Hard Spring 53636 SPEC-R Gear Differential 0.2mm Internal Shim Set 10pcs SPR010-SH2 Tamiya Medium Narrow Dish Wheels Smoke Offset 0 49407
Dish, clear smoke colored plastic 24 mm width wheels. Limited edition
Tamiya Gear Differential Shim Set 54589 Tamiya TRF415 Urethane Bumper Black 49463 Tamiya TRF416 Differential Screw Nut 51341

Get your gear differential set up exactly how you want
it! This handy shim set features 2 different thicknesses of shim (0.2 and 0.3mm)
to allow fine adjustment of the bevels in your gear diff.



Note: These shims are
meant to be used in Tamiya oil-filled gear differential units employed in 4WD
touring cars and 4WD off-road buggies.



Set Contents:



  • 5x10x0.2mm Shim x4
  • 5x10x0.3mm Shim x4

  • This Option Part will be available as a limited edition event-only item for visitors to this autumn's Tokyo Hobby Show. It is a color variation of an existing gray-colored bumper (PART# 16275070 Urethane Bumper for 58371), and the new black color will enable the bumper to better blend in with the chassis for a more uniform appearance.

    *Compatible Chassis: All TRF415 chassis, TB Evolution 5, 30th Anniversary Porsche Turbo RSR Type 934, TA05 MS.

    Tamiya Large Ball Differential Alloy Plate 54390 Tamiya 1050 Ball Bearing 3mm Thick 2pcs 42220 Tamiya Racing Wing α 54457

    Item 51287 Large Ball Diff Plate was produced as the stock replacement diff ring part for many of Tamiya's R/C car chassis.

    This new option version has been produced with a more durable alloy material for more effective performance.

    • Large Ball Diff Plate x 2
    • Compatible with FF-03, TA05 ver.II, TRF511 and TRF 501 chassis machines

    Specs and Features

    • 1050 Ball Bearing (3mm Thick) x 2
    • Use as a spare part for Item 42216.
    Tamiya Cross Joint for 49175 4pcs 9805775 Tamiya 3x42mm TurnBuckle Shaft 9805902 Tamiya Differential Spring for 58261 TA04 PRO 9949299

    Cross Joint from Tamiya Item 53500.

    Usable with: 49175 TA04 Works Chassis Kit

    Usable with: 58395 Durga. 2 pieces of Ball Diff Spring for Most Tamiya Chassis.
    Tamiya TA06 Gear Differential Unit Bevel Gear Set 51460 Tamiya TB03 Lightweight Urethane Bumper 84049 Tamiya Urethane Bumper for 58371 6275070

    Bevel Gear Set for the Tamiya New Gear Differential.

    Fits the Tamiya TA06 and TA06 PRO differentials and the Tamiya Items 42197 & 54312.

    Fits:

    • TB-03
    • TRF416
    • TRF417
    • TRF415
    • TB-EVO 5
    • TA05 MS
    usable with: TB Evolution V.
    Tamiya TA05 IFS Carbon Reinforced F Parts Hub Carrier 4 Degree 54031 Tamiya TRF Sticker C Mirror Finish Border Black 42246 Tamiya TRF Damper Piston 3-Hole 4pcs 53573

    These new hub carriers are made from carbon fiber-reinforced resin material for increased durability. Tougher hub carriers also mean sharper steering response, giving the car better handling characteristics.

    *Compatible Chassis: TA05 Ver.2, TA05-IFS, TRF416, TRF417, TB03, TB Evo 5 MS, FF03

    These pistons are made out of solid Teflon material to ensure smooth shock movement when used on Tamiya's world famous TRF dampers for touring cars.

    Tamiya 3x42mm Aluminum Turnbuckle Shaft Black 84022 Tamiya Front Stabilizer Set for 49381 TRF415MSX 9808028 Tamiya TRF416 C Parts Front Upright 51332
    Tamiya TRF416 E Parts Rear Upright 51333 Tamiya TRF501X K Parts Bearing Holder 51278 Tamiya Drive Belt Short for 42106 TRF416 6244017

    *This is from the latest shipment will fit on TRF417 New Style Universal Joint.