Home > All Brands > TAMIYA > TA06 / TA06 PRO
Tamiya TA-06 Parts
Sort By:
Page of 4
Tamiya TRF Damper Oil Seal 4pcs 53576 Tamiya 5mm Ball Connector for 43514 4pcs 9804205 Tamiya TRF417 Cross Joint Set 51444
These damper oil seals are direct replacements for Tamiya TRF touring car dampers. Racer Tip: Adding o-rings or foam bushings between the rubber oil seal and plastic damper cap will yield different damping effects. No Original Packaging.

Usable with:
43514 Buggy Nitro Thunder NDF01.

Specs & Features

  • These Cross Joints are wheel axle maintenance parts for the TRF417 Chassis Kit (Item 42184).
  • Cross joint x 2pcs.
  • Axle ring x 2pcs.
  • 2x9.8mm Needle pin x 2pcs.

  • APS Dual Metal Shielded Ball Bearings 4x8x3mm APS48MS Tamiya TRF Damper Shaft Guide Grooved 4pcs 84292 Tamiya 4mm Flange Locknut for 57602 9805557

    * Please notice the photo is only for sample. Please read the description for the actual size. Only one piece bearing per order.

    APS Racing Dual metal shielded ball bearings 4x8x3mm Steel retainers for durability.

    Top & bottom dual metal shields for maximum smoothness.

    Low to medium maintenance.

    Includes: 1 pc. Bearing per pack.

    Usable With:

    • Tamiya TRF Damper
    • DF-03 Aluminum Damper Set
    • M-Chassis Aluminum Damper Set
    • Hotshot (2007)
    • Avante (2011)

    Spec:

    • Inner Diameter: 2.8mm
    • Outer Diameter: 6.54mm
    • Thickness: 2.1mm
    Tamiya TB03 E Parts Rear Upright 51354 Tamiya TA06 Gear Differential Unit Gasket 4pcs 51464 Tamiya Maintenance Parts Set for Gear Differential Unit Cup Joint 51470

    Fit Tamiya TA06, TA05 & TRF417 Gear Diff Unit.

    TEAM ASSOCIATED Stealth Differential Lube 4cc ASC6591 Tamiya Medium Narrow Dish Wheels Smoke Offset 0 49407 Tamiya Gear Differential Shim Set 54589
    Dish, clear smoke colored plastic 24 mm width wheels. Limited edition

    Get your gear differential set up exactly how you want
    it! This handy shim set features 2 different thicknesses of shim (0.2 and 0.3mm)
    to allow fine adjustment of the bevels in your gear diff.



    Note: These shims are
    meant to be used in Tamiya oil-filled gear differential units employed in 4WD
    touring cars and 4WD off-road buggies.



    Set Contents:



  • 5x10x0.2mm Shim x4
  • 5x10x0.3mm Shim x4

  • Tamiya 5mm Gear Differential O-Rings Red 8pcs 42259 Tamiya TA06 Main Shaft & Middle Shaft 51461 Tamiya TA06 Rear Gear Differential Case Set 52T 51462

    These are 5mm O-rings designed to be used in many of Tamiya’s oil-filled sealed gear differentials like the ones’ found on the TA-05 option sealed gear set as well as the included sets found on the TA-06, XV-01 and TRF417 series of cars. The inner diameter of the O-ring is slightly smaller than the standard kit black O-ring. The smaller inner diameter O-ring better prevents oil from leaking out of the gear differential.

    • Set contains eight red O-rings.
    Tamiya TA06 Counter Gear & Idler Gear 51465 Tamiya 1050 Ball Bearing 3mm Thick 2pcs 42220 Tamiya Racing Wing α 54457

    Specs and Features

    • 1050 Ball Bearing (3mm Thick) x 2
    • Use as a spare part for Item 42216.
    Tamiya 54568 OP1568 TRF418 C Parts Carbon Reinforced Front Uprights Tamiya Body Mount Extension Set 54604 Tamiya TA06 Gear Differential Unit Bevel Gear Set 51460

    These uprights are made from the same carbon fiber-reinforced material as those found in the exciting new TRF418 chassis kit, providing durability and excellent performance.

    • Contains Front Uprights x2

    Compatible with Tamiya 1/10 scale touring car models fitted with short reversible suspension arms; TB-03, TA-05 Version II, TA-06, TRF416, 417 and FF-03.

    This newly-designed body mount extension piece and snap pin set allows you to extend body mounts on your RC model car. They are intended to be used on those body posts which have been shortened for use with other bodies. They are compatible with a wide range of major Tamiya touring car and M-Chassis models.

  • Contains 5.5mm Body Mount Extension x4, 6mm and 7mm Snap Pins x4
  • Usable with 5.5-6mm diameter body mounts.
  • Compatible with TT-01, TT-02, TA05, TA06, TB-03, TB-04, XV-01, FF-03, M-05 and M-06 chassis body mounts.

  • Bevel Gear Set for the Tamiya New Gear Differential.

    Fits the Tamiya TA06 and TA06 PRO differentials and the Tamiya Items 42197 & 54312.

    Tamiya TA06 A Parts Bulkhead 51454 Tamiya TA06 J Parts Damper Stay 51455 Tamiya TA05 IFS Carbon Reinforced F Parts Hub Carrier 4 Degree 54031

    These new hub carriers are made from carbon fiber-reinforced resin material for increased durability. Tougher hub carriers also mean sharper steering response, giving the car better handling characteristics.

    *Compatible Chassis: TA05 Ver.2, TA05-IFS, TRF416, TRF417, TB03, TB Evo 5 MS, FF03

    Tamiya TRF Damper Piston 3-Hole 4pcs 53573 Tamiya TRF416 E Parts Rear Upright 51333 Tamiya TB03 D Parts Suspension Arm 51353

    These pistons are made out of solid Teflon material to ensure smooth shock movement when used on Tamiya's world famous TRF dampers for touring cars.

    *This is from the latest shipment will fit on TRF417 New Style Universal Joint.

    * This is the Plastic Short Rev. Arm Set

    Tamiya TA06 Aluminum Motor Mount Adapter 54371 Tamiya TA06 Cross Shaft for Gear Differential Unit 54311 Tamiya TA06 Lightweight Front Middle Shaft 54434
    The TA06 Aluminum Motor Mount Adapter replaces the kit-standard plastic part to reduce chassis torsion during high-speed cornering and increase power transfer efficiency.
    Specs & Features
    Aluminum Motor Mount Adapter x 1pc.
    Compatible with the TA06 chassis.

    Made from hard- coated aluminum, this lightweight, durable front middle shaft offers efficient power transfer and improved throttle response. It is compatible with a wide variety of pulleys to allow for creating drift settings on the TA-06 chassis.

  • Lightweight Front-Middle Shaft x1
  • Compatible with TA06 and TA06PRO chassis
  •