Home > All Brands > TAMIYA > TRF415 / TRF415 MS / TRF415 MSX
Tamiya TRF415 All Verison Parts
Sort By:
Page of 5
Tamiya 2.6x10mm Screw Pin 2pcs 51097 Tamiya TRF Short Damper Spring Extra Hard 2pcs 53633 Tamiya TRF Short Damper Spring Soft 2pcs 53630
Tamiya Silver Coil Spring 2pcs 9805699 This is the pair of Tamiya Silver Coil Spring. Spring Rate is between the Blue and Yellow Springs from Tamiya 53440 ON-ROAD Tuned Hard Spring Set. Tamiya 4mm Adjuster for 3mm Screws 8pcs 51111 Tamiya TRF Damper Oil Seal 4pcs 53576

This is the pair of Tamiya Silver Coil Spring.

Spring Rate is between the Blue and Yellow Springs from Tamiya 53440 ON-ROAD Tuned Hard Spring Set.

 		These damper oil seals are direct replacements for Tamiya TRF touring car dampers. Racer Tip: Adding o-rings or foam bushings between the rubber oil seal and plastic damper cap will yield different damping effects.
Tamiya TA05 IFS C Parts Front Upright 51296 Tamiya TB Evolution IV E Parts Rear Upright 51105 Tamiya 5mm Ball Connector 4pcs 9804205

This Front Upright shape is not same as the one come with TA05 IFS-R Chassis Kit. Please Order Tamiya 51332 for replacement.

Use with 5 X 9mm Bearings.

Original from Tamiya TA05-IFS Chassis Kit.

This Front Upright Shape is same as Tamiya Item 51103.

 		No Original Packaging. No Original Packaging.
Tamiya TB Evolution IV Hub Carrier 2 Degree 51106 Tamiya TRF Damper Shaft Guide Grooved 4pcs 84292 Tamiya TA04 King Pin Set 50882

* No Original Packaging.

Front Hub Carrier 2 Degree Caster. Usable with Reversible Light Weight Suspension.

Usable With:

  • Tamiya TRF Damper
  • DF-03 Aluminum Damper Set
  • M-Chassis Aluminum Damper Set
  • Hotshot (2007)
  • Avante (2011)

Spec:

  • Inner Diameter: 2.8mm
  • Outer Diameter: 6.54mm
  • Thickness: 2.1mm

Also fit on M03 New Style Suspension King-Pin.
Tamiya Ultra Hard Spring 53636 Tamiya 12mm O Ring 4pcs 9444361 Tamiya TB Evolution IV Ball Head King Pin 51101

Ball-Head King Pin for TB Evo 4/MS, TRF 415MS and usable with Reversible Light Weight Suspension Kit.
Tamiya TRF415 1510 Bearing Holder 51053 Tamiya Medium Narrow Dish Wheels Smoke Offset 0 49407 Tamiya Swing Shaft Protector 4pcs 53890
Dish, clear smoke colored plastic 24 mm width wheels. Limited edition
Tamiya TA05 Wide Pitch Differential Pulley 36T 53935 Tamiya 2.6x22mm Screw Pin 2pcs 51098 Tamiya 2.6x25mm Screw Pin 2pcs 51099

This diff pulley features number of gear teeth reduced by half from 36T to 18T, for wider gear pitch. This unique design developed by Tamiya greatly reduces belt resistance and improves transmission efficiency.
Tamiya TRF415 Urethane Bumper Black 49463 Tamiya 3x10mm Aluminum Turnbuckle Shaft Black 84019 Yeah Racing Graphite Front Bumper Plate TB5-040

This Option Part will be available as a limited edition event-only item for visitors to this autumn's Tokyo Hobby Show. It is a color variation of an existing gray-colored bumper (PART# 16275070 Urethane Bumper for 58371), and the new black color will enable the bumper to better blend in with the chassis for a more uniform appearance.

*Compatible Chassis: All TRF415 chassis, TB Evolution 5, 30th Anniversary Porsche Turbo RSR Type 934, TA05 MS.

Usable with:

  • TRF415MSX, TRF415MS
  • TB Evolution IV MS, TB Evolution IV

    Adjusters should be modified.

    •      		For TB Evolution V, TRF415 MSX.
    Tamiya Cross Joint for 49175 4pcs 9805775 Tamiya 3x42mm TurnBuckle Shaft 9805902 Tamiya 2x30mm Cap Screw 2pcs 9805939

    Cross Joint from Tamiya Item 53500.

    Usable with: 49175 TA04 Works Chassis Kit

         		Usable with: 58395 Durga.

    For 415/415MS Plastic or Reinforce Diff Joint only.
    Tamiya Differential Spring for 58261 TA04 PRO 9949299 Tamiya 2x25mm Cap Screw 2pcs 9949350 Tamiya TB03 Lightweight Urethane Bumper 84049
    2 pieces of Ball Diff Spring for Most Tamiya Chassis.

    For Most Tamiya Touring Car Diff. Join. with 2x25mm Diff Cap Screw.

    Fits:

    • TB-03
    • TRF416
    • TRF417
    • TRF415
    • TB-EVO 5
    • TA05 MS