Home > All Brands > TAMIYA > DN-01
Sort By:
Page of 1
Tamiya 5mm Ball Connector 8pcs 50875 Tamiya 3mm Nut 10pcs. 9805896 Tamiya Buggy Soft Springs Set From 53927
* This item was taken out from the Tamiya Car Kit, No Tamiya Original Retail Packing

NOTE: These items are taken from Tamiya Open Box Chassis Kit, No Original Packing * This item was taken out from the Tamiya Car Kit, No Tamiya Original Packing.
Tamiya 4mm Flange Locknut 9805557 Tamiya 3x10mm Screws 10pcs. 9804159 Tamiya 54488 (OP1488) TRF201 DN-01 DB01 DB-01 DB02 DB-02 TRF511 TRF-511 TRF502X TRF-502X Large Rear Axle Washers (2pcs)
* This item was taken out from the TG10 MK2 Car Kit, No Tamiya Retail Packing * This item was taken out from the Tamiya Car Kit, No Tamiya Original Packing

Philip Head Screws.

This option part is an integrated rear axle washer and 1mm spacer, which when fitted provides a reduction in deviation in the rotation of the wheel, and enables easier maintenance of your R/C car.

Large rear axle washers x2

Tamiya 3X6mm CAP SCREW 2pcs 9808013 Tamiya LARGE BALL DIFF. PLATE 51287 Tamiya 3x33.4mm Shaft 2pcs. 9808241
* This item was taken out from the Tamiya Car Kit, No Tamiya Original Retail Packing.
NOTE: These items are taken from Tamiya Open Box Chassis Kit, No Original Packing * This item was taken out from the Tamiya Car Kit, No Tamiya Original Packing
Tamiya 2mm E Ring 15pcs 50588 Tamiya DN01 DT02 TRF201 Inner Sponge Front 2pcs 51448 Tamiya Big Bore Aeration Damper Piston Blank 4pcs 54509
NOTE: These items are taken from Tamiya Open Box Chassis Kit, No Original Packing
Inner Sponges for use with the front tires of 2WD Buggy machines.
Specs & Features
  • Inner sponge x 2pcs.
  • Can be used with front tires from DN-01, DT-02, and TRF201 chassis machines.
  • Also compatible with Item 51207 Off-Road Wide Grooved Front Tires (60/19).

Take complete control of the details in your suspension! These blank pistons allow the owner to make as many holes of whatever size they like, in order to get the suspension performance they want. Compatible with items 54504/54505 Buggy Big Bore Aeration Dampers.

  • Pistons x4
  • Tamiya 2.6 x 27mm Shaft 4pcs 9804301 TRF501X DB01 Tamiya 6mm Snap Pin (Body Clip) 10 pcs. 9805702 Tamiya 2 X 8mm Shaft 4pcs. 9805823
    NOTE: These items are taken from Tamiya Open Box Chassis Kit, No Original Packing * This item was taken out from the Tamiya Car Kit, No Tamiya Original Retail Packing
    * This item was taken out from the Tamiya Car Kit, No Tamiya Original Packing
    Tamiya 46mm Suspension Shaft 4pcs 51093 * No Retail Packing Tamiya DB01 Dish Wheels Rear White 51321 Tamiya DN-01 R Parts Rear Lower Arm 51449
    NOTE: These items are taken from Tamiya Open Box Chassis Kit, No Original Retail Packing.

    White in color

    Designed for use with pin type axles

    Fits Tamiya TRF501X, DB01, TRF511, TRF502X , DN-01 & TRF201 Rear

    Specs & Features

  • These are the R Parts (Rear Lower Arms) for DN-01 chassis machines.
  • R Parts x 1 set.
  • Compatible with DN-01 and TRF201 chassis machines.

  • Tamiya N Parts for 42167 TRF201 DN-01 9114075 Tamiya 54499 OP1499 Protective Sticker Hard Chassis Protector TRF Carbon Graphite Chassis TRF417 TRF418 Yokomo Xray Team Associated Tamiya Buggy Racing Wing XF 54536
    This is a protective film designed to be used under the main chassis of your favorite R/C vehicle. It's highly adhesive and when stuck to the chassis it provides long-lasting protection against scratches by contacting track surface, and thanks to its transparency will not detract from the model’s appearance.

    • Thickness: 0.3mm
    • Contains 180x330mm sheets x2

    This polycarbonate material buggy racing wing is compatible with a wide range of buggy chassis. It may be used on the TRF201, DB-01, DB-02, TRF502X, DN-01, DF-03, DT-02 and TT-02B chassis. It may be cut into different sizes depending on the track layout and the desired wing effects.

    Tamiya Off-Road Soft Tires Wide Grooved 2WD Front 60/19 54284 Tamiya 3x46mm Turnbuckle Shafts 2 Pcs 9804302 Tamiya DF-03 Setting Spring Set 53927

    2WD off road buggy soft compound front tires.

    Specs & Features:

    • Tire x 2pcs.
    • Compatible with DN-01, TRF201, and DT-02 chassis machines.
    • Compatible with Item 51205 2WD Off-Road Astral-Dish Front Wheels (60/19).
    • Use with Item 51448 DN-01 Inner Sponge (Front) is recommended.
    NOTE: These items are taken from Tamiya Open Box Chassis Kit, No Original Packing
    Tamiya TRF201 Cooling Pressure Plate 84297 Tamiya TRF201 Suspension Weight Block 0 Degree 54439 Tamiya TRF201 Suspension Weight Block 5 Degree 54440

    These pressure plates for the TRF201's slipper clutch feature a hard-coated surface and holes for improved heat dissipation.

    The improved heat dissipation ensures the slipper effect is consistent under any circumstances.

    • Slipper Plate x 2
    • Compatible with TRF201 and DN-01 chassis.
    • Note: For DN-01 chassis, use with Item 54260 DN-01 Slipper Clutch Set.

    This metal suspension block (approx. 30g) replaces the kit-standard N3 parts to help provide greater front wheel traction and increased rigidity.

  • Suspension Block (0°) x1
  • Suspension Plate x1
  • Suspension Bushing x2
  • Compatible with TRF201 and DN-01 chassis.

  • This metal suspension block (approx. 30g) replaces the kit-standard N3 parts to help provide greater front wheel traction and a skid angle increase of 5°.

  • Suspension Block (5°) x1
  • Suspension Plate x1
  • Suspension Bushing x2
  • Compatible with TRF201 and DN-01 chassis.

  • Tamiya DN-01 Slipper Clutch Set 54260
    When driving your machine off-road, the motor and drive train are put under a lot of pressure from braking and jumping. This slipper clutch set will help ease the pressure and provide your machine with excellent support.