Home > All Brands > TAMIYA > TG10 MK1
Tamiya TG10 MKI Parts, Hop Ups
Sort By:
Page of 1
Tamiya GP Short Damper Spring Medium Hard 53750 Tamiya TRF Damper Oil Seal 4pcs 53576 Tamiya 5mm Ball Connector for 43514 4pcs 9804205
1:10 Scale glow engine R/C short damper spring (Medium-hard) Designed for wider range of front suspension settings.

For use with 1:10 scale glow engine R/C cars.
 		These damper oil seals are direct replacements for Tamiya TRF touring car dampers. Racer Tip: Adding o-rings or foam bushings between the rubber oil seal and plastic damper cap will yield different damping effects. No Original Packaging.

Usable with:
43514 Buggy Nitro Thunder NDF01.
Tamiya TA04 King Pin Set 50882 Tamiya Spare Sponge for Oil Catcher 4pcs 41060 Tamiya GP Short Damper Spring Medium 53749

Also fit on M03 New Style Suspension King-Pin.

Used with Tamiya Part 41059 RC GP Oil Catcher.

RC GP Short Damper Spring (Medium)

Designed for wider range of front suspension settings.
Tamiya 3x10mm Step Screw 5pcs 50579 Tamiya TG10 Mk1 Front Propeller Joint 50807 Tamiya TG10 Bumper 50803
Tamiya TG10 Bumper 50803
Our Price: US$5.00
Tamiya TG10 Front Hub Carrier 50817 Tamiya TG10 Mk1 Battery Case Cover 50819 Tamiya 1:10 Glow Engine Damper Spring Medium 53754

  • TG10 Mk.1
  • TB-01 * Cannot be used with 53430

For:

  • TG10 Mk.1
  • TGM-01

1:10 Scale glow engine R/C damper spring (medium)

Designed for wider range of front suspension settings. For use with 1:10 scale glow engine R/C cars.
Tamiya TGR F Parts Rear Upright 50908 Tamiya TG10 2 Speed Pinion 16T 20T 53362 Tamiya TG10R Rear Drive Shaft 50920
  • TGR
  • ＴＧ10 use with item 53430
  • TB-01
  • TB-EVOII

Usable With:

  • TG10-MK.1 Chassis equipped With Tamiya Item 53359
Tamiya TG10R Rear Drive Shaft 2pcs 50920 9804141 Tamiya TG10 Long Wheel Axle 2pcs 50808 Tamiya TG10 Stabilizer Set 53354

  • TG10 Mk.1
  • TB-01 * Cannot be used with 53430
  • WR-02 Chassis

For:

  • TG10 Mk.1
  • TB-01
Tamiya TB01 TG10 Front Upright 2pcs 9335343 Tamiya TNS Stainless Suspension Shaft Set 53830 Tamiya Racing Wing Set 2 Hard Type 1mm 1:10 RC Car Touring Drift 84371
Fits: TGR, TG10, TB-01.

This wing set is a reinforced version of Item 54494 Racing Wing Set 2. It includes two different shapes of wing; curved and straight - which can be used to adjust the downforce of your RC car model. The wings are made from 1.0mm thickness polycarbonate, as opposed to the 0.7mm thickness of those in Item 54494.

  • Curved wing x1
  • Straight wing x1
  • J Parts (wing stay) x1
  • Snap pins and O-rings necessary for attachment, plus attachment instructions.
Tamiya TG10 Oil Catcher 41059 Tamiya TGX 2-Speed Transmission Clutch Shoe Set 53212 Tamiya TG10R J Parts 50919
Tamiya TG10R J Parts 50919
Our Price: US$14.00

Usable With:

  • TGX-MK.1 Chassis Equipped with Tamiya part 53210
  • TG10-Mk.1 Chassis Equipped with Tamiya part 53359
  • TGR
  • TG10R
Tamiya TG10 Mk1 Chassis 50805 Tamiya TG10R Lower Deck 50918 Tamiya .12 .15 Engine Maniford 41050
Tamiya FS-12R Glow Engine 41049