Home > All Brands > TAMIYA > TL01 / TL01 LA
Tamiya TL-01 TL01 Chassis Parts Hop Ups
Sort By:
Page of 2
Tamiya TRF Short Damper Spring Soft 2pcs 53630 Tamiya Silver Coil Spring 2pcs 9805699
This is the pair of Tamiya Silver Coil Spring.
Spring Rate is between the Blue and Yellow Springs from Tamiya 53440 ON-ROAD Tuned Hard Spring Set. Tamiya TRF Damper Oil Seal 4pcs 53576

This is the pair of Tamiya Silver Coil Spring.

Spring Rate is between the Blue and Yellow Springs from Tamiya 53440 ON-ROAD Tuned Hard Spring Set.

These damper oil seals are direct replacements for Tamiya TRF touring car dampers. Racer Tip: Adding o-rings or foam bushings between the rubber oil seal and plastic damper cap will yield different damping effects.
Tamiya 5mm Ball Connector for 43514 4pcs 9804205 Tamiya Plastic Bearing Bag 84/62/70 10pcs 0555015 Tamiya Ultra Hard Spring 53636
No Original Packaging.

Usable with:
43514 Buggy Nitro Thunder NDF01.
Tamiya Medium Narrow Dish Wheels Smoke Offset 0 49407 Tamiya Differential Bevel Gear Set 50602 Tamiya TL01 LA Front Upright 50964
Dish, clear smoke colored plastic 24 mm width wheels. Limited edition
Tamiya TL01 Turnbuckle Tie-Rod Set 53300 Tamiya TL01 B Parts 9005698 Tamiya TL01 E Parts Body Mount 50855

Toe Angle can easily br adjusted by rotating the shaft without removing the adjuster.

Can be use with TL-01 Chassis (Cannot be used with 53467)

Tamiya TL01 M03 Toe-In Rear Upright 53345 Tamiya Gear Box Joint Long & Short 9805368 Tamiya TL01 Adjustable Upper Arm Set 53303

A Set of Optional Rear Toe-in Uprights.

Usable with TL-01, Old M03, Old M03L and Old M04 chassis Car.

2 Degrees rear toe-in.

Useable with Tamiya TL-01, FF02, WR-02, and Stadium Racer.

INCLUDES:

  • Eight Ball Ends (5mm)
  • Four Ball Nuts
  • Four Ball Studs
  • Two 3x12 Screw Shafts
  • Two 3x18 Screw Shafts
  • Four 3x10 Step Screws
Tamiya Red Plated 2-Piece 6 Spoke Wheels 26mm Width + 6 Offset 54553 Tamiya TL01 B Parts Upright 50736 Tamiya F103 Thrust Bearing Set 51346

Jazz up your 1:10 scale touring car model with these new 2-piece wheels! They feature a stylish 6-spoke design, with the silver-color metal plated rims complemented by a red metal-plated cap and spokes.

  • Wheels are 26mm wide, and compatible with any tires of the same width.
  • Each set includes 2 wheels

Compatible with all 1:10 touring car models.

Also Usable With:

  • Tamiya M-03
  • Tamiya M-03L (Old Version)
  • Tamiya M-04L (Old Verison)
  • Tamiya WR-02
  • Tamiya FF02
Tamiya Manta Ray Differential Ball & Plate Set 53072 Tamiya TL01 Stabilizer Set 53324 Tamiya TL01 G Parts Gear 50738
Diff Rebuild kit for Manta Ray & TA03 ball Diff.
Tamiya TL01 M03 Quick Release Battery Holder 53346 Tamiya TL01 Speed-Tuned Gear Set 53342 Tamiya TL01 C Parts Suspension Arm 50737

Usable with the FF02, TL01, M-03 and M-04 vehicles.

Its' one-touch lever action allows for quicker battery changes.

Tamiya Racing Wing Set 53604 Tamiya On-Road Tuned Hard Spring Set Mica Black 84324 Tamiya On-Road Tuned Hard Spring Set Mica Blue 84325
Tamiya Racing Wing Set 53604
Our Price: US$12.00

Create More Down Force.

Comes with 2 difference Setup of Clear Wings.

Can be used for Body Rear Down Force Tuning.

TCS Legal.

These on-road tuned springs feature a special Mica Black color surface.

Each set contains Soft, Medium, Hard, and Extra Hard springs (2pcs. each) to allow fine setting adjustment of your favourite Tamiya Touring Car chassis according to the race track conditions.

Mica Black Spring (Soft, Medium, Hard, Extra Hard / 2pcs each)

These on-road tuned springs feature a special Mica Blue color surface.

Each set contains Soft, Medium, Hard, and Extra Hard springs (2pcs. each) to allow fine setting adjustment of your favourite Tamiya Touring Car chassis according to the race track conditions.

Mica Blue Spring (Soft, Medium, Hard, Extra Hard / 2pcs each)

Tamiya 4WD Front One-Way Differential Unit 53200 Tamiya TL01 LA Stabilizer Set 53517 Tamiya On-Road Tuned Hard Spring Set 53440

N Parts and One-Way Bearing

INCLUDES:

  • Two One Way Shafts
  • One 9 mm Washer
  • One 8 mm One-Way Bearing
  • One N Parts Tree

Fits Tamiya TGX, TG-10, TA03, TL-01 & M03.

Package includes:

  • Two Soft springs (red)
  • Two medium springs (yellow)
  • Two stiff springs (blue)
  • Two extra stiff springs (white)