|
|
|
|
|
|
|
|
|
|
|
|
|
No Original Packaging.
|
These are lightweight gear shafts. The tubing material used in their construction makes for a weight reduction of approximately 5 grams (from 7.6g to 2.5g) over the kit standard 5x50mm shafts. Set Contents: - Contains 5x50mm Lightweight Gear Shaft x2.
- Compatible with GF-01, WR-02, WR-02G and WT-01 chassis cars.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Useable with Tamiya TL-01, FF02, WR-02, and Stadium
Racer.
INCLUDES:
- Eight Ball Ends (5mm)
- Four Ball Nuts
- Four Ball Studs
- Two 3x12 Screw Shafts
- Two 3x18 Screw Shafts
- Four 3x10 Step Screws
|
These shafts are used in place of
3x22mm screw pins and ensure secure attachment thanks to E-rings.
The shaft also features a low-friction
coating for smoother suspension movement.
- Low-Friction Shaft x 4
- E-rings included.
- Compatible with DT-02, TT-01, and WR-02
chassis.
|
Also Usable With:
- Tamiya M-03
- Tamiya M-03L (Old Version)
- Tamiya M-04L (Old Verison)
- Tamiya WR-02
- Tamiya FF02
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- TG10 Mk.1
- TB-01 * Cannot be used with 53430
- WR-02 Chassis
|
This is a red color molded main chassis frame to the WR-02 chassis. It can be used to give your RC model a unique appearance compared to the black parts included with the original kit.
|
This is a white color molded main chassis frame to the WR-02 chassis. It can be used to give your RC model a unique appearance compared to the black parts included with the original kit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use the aluminum support to strengthen vertical joint at the front or rear, protecting the chassis from larger impacts and shutting out dust - Compatible with GF-01 and WR-02 chassis cars.
|
The included roller wheel on the WR-02 chassis is made of plastic. Many comical R/C releases have been put on the WR-02 chassis such as the Wild Willy 2, Volkswagen Bus Type 2 and the Farm King Wheelie. This new aluminum roller ball is fitted with ball bearings for smoother operation and it also provides a custom appearance.
- Easy to fit onto the Wheelie series models, and built-in 1050 ball bearings provide smoother wheels-in-the-air action.
- Compatible with the WR-02 chassis.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The standard WR-02 chassis frames are molded in black. The limited edition orange molded color set offers the R/C kit builder to make their WR-02 kit unique. Compatible with WR-02 chassis.
|
The standard WR-02 chassis frames are molded in black. The limited edition white molded color set offers the R/C kit builder to make their WR-02 kit unique. Compatible with WR-02 chassis.
|
These are gold plated wheels designed to fit the WR-02 (wheelie) chassis, such as the Wild Willy II and Volkswagen Type 2 Wheelie.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is the popular driver figure from the Wild Willy 2 R/C car kit. It comes complete with helmet and full body parts to complete one driver figure.
- Plastic assembly kit figure.
- Item includes parts necessary for attachment.
- Compatible with WR-02 chassis or can be modified to fit your custom creation.
|
|
This is an oil filled damper set designed to be used on the Tamiya WR-02 chassis platform. The damper unit is made of plastic and comes in yellow color. These versatile dampers can be adjusted using different damper ends and spacers included in the set.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
