Home > All Brands > TAMIYA > TA05 MS
Tamiya TA-05 MS Parts
Sort By:
Page of 3
Tamiya TRF Short Damper Spring Extra Hard 2pcs 53633 Tamiya TRF Short Damper Spring Soft 2pcs 53630 Tamiya Silver Coil Spring 2pcs 9805699 This is the pair of Tamiya Silver Coil Spring. Spring Rate is between the Blue and Yellow Springs from Tamiya 53440 ON-ROAD Tuned Hard Spring Set.

This is the pair of Tamiya Silver Coil Spring.

Spring Rate is between the Blue and Yellow Springs from Tamiya 53440 ON-ROAD Tuned Hard Spring Set.
Tamiya TRF Damper Oil Seal 4pcs 53576 Tamiya TA05 IFS C Parts Front Upright 51296 Tamiya TB Evolution IV E Parts Rear Upright 51105
These damper oil seals are direct replacements for Tamiya TRF touring car dampers. Racer Tip: Adding o-rings or foam bushings between the rubber oil seal and plastic damper cap will yield different damping effects.

This Front Upright shape is not same as the one come with TA05 IFS-R Chassis Kit. Please Order Tamiya 51332 for replacement.

Use with 5 X 9mm Bearings.

Original from Tamiya TA05-IFS Chassis Kit.

This Front Upright Shape is same as Tamiya Item 51103.

 		No Original Packaging.
Tamiya 5mm Ball Connector for 43514 4pcs 9804205 Tamiya TB Evolution IV Hub Carrier 2 Degree 51106 Tamiya TRF Damper Shaft Guide Grooved 4pcs 84292
No Original Packaging.

Usable with:
43514 Buggy Nitro Thunder NDF01.

* No Original Packaging.

Front Hub Carrier 2 Degree Caster. Usable with Reversible Light Weight Suspension.

Usable With:

  • Tamiya TRF Damper
  • DF-03 Aluminum Damper Set
  • M-Chassis Aluminum Damper Set
  • Hotshot (2007)
  • Avante (2011)

Spec:

  • Inner Diameter: 2.8mm
  • Outer Diameter: 6.54mm
  • Thickness: 2.1mm
Tamiya Ultra Hard Spring 53636 Tamiya Medium Narrow Dish Wheels Smoke Offset 0 49407 Tamiya Gear Differential Shim Set 54589
Dish, clear smoke colored plastic 24 mm width wheels. Limited edition

Get your gear differential set up exactly how you want
it! This handy shim set features 2 different thicknesses of shim (0.2 and 0.3mm)
to allow fine adjustment of the bevels in your gear diff.



Note: These shims are
meant to be used in Tamiya oil-filled gear differential units employed in 4WD
touring cars and 4WD off-road buggies.



Set Contents:



  • 5x10x0.2mm Shim x4
  • 5x10x0.3mm Shim x4

    •
    Tamiya 5mm Gear Differential O-Rings Red 8pcs 42259 Tamiya TA05 Wide Pitch Differential Pulley 36T 53935 Tamiya TRF415 Urethane Bumper Black 49463

    These are 5mm O-rings designed to be used in many of Tamiya’s oil-filled sealed gear differentials like the ones’ found on the TA-05 option sealed gear set as well as the included sets found on the TA-06, XV-01 and TRF417 series of cars. The inner diameter of the O-ring is slightly smaller than the standard kit black O-ring. The smaller inner diameter O-ring better prevents oil from leaking out of the gear differential.

    • Set contains eight red O-rings.

    This diff pulley features number of gear teeth reduced by half from 36T to 18T, for wider gear pitch. This unique design developed by Tamiya greatly reduces belt resistance and improves transmission efficiency.

    This Option Part will be available as a limited edition event-only item for visitors to this autumn's Tokyo Hobby Show. It is a color variation of an existing gray-colored bumper (PART# 16275070 Urethane Bumper for 58371), and the new black color will enable the bumper to better blend in with the chassis for a more uniform appearance.

    *Compatible Chassis: All TRF415 chassis, TB Evolution 5, 30th Anniversary Porsche Turbo RSR Type 934, TA05 MS.
    Tamiya 3x42mm TurnBuckle Shaft 9805902 Tamiya Differential Spring for 58261 TA04 PRO 9949299 Tamiya 2x25mm Cap Screw 2pcs 9949350
    Usable with: 58395 Durga. 2 pieces of Ball Diff Spring for Most Tamiya Chassis.

    For Most Tamiya Touring Car Diff. Join. with 2x25mm Diff Cap Screw.
    Tamiya TA06 Gear Differential Unit Bevel Gear Set 51460 Tamiya TB03 Lightweight Urethane Bumper 84049 Tamiya Urethane Bumper for 58371 6275070

    Bevel Gear Set for the Tamiya New Gear Differential.

    Fits the Tamiya TA06 and TA06 PRO differentials and the Tamiya Items 42197 & 54312.

    Fits:

    • TB-03
    • TRF416
    • TRF417
    • TRF415
    • TB-EVO 5
    • TA05 MS
         		usable with: TB Evolution V.
    Tamiya TRF Damper Piston 3-Hole 4pcs 53573 Tamiya Front Stabilizer Set for 49381 TRF415MSX 9808028 Tamiya TA05 Ball Differential Pulley 36T 51212

    These pistons are made out of solid Teflon material to ensure smooth shock movement when used on Tamiya's world famous TRF dampers for touring cars.
    Tamiya TA05 Front One-Way Pulley 36T 53867 Tamiya TA05 Wide Pitch Front One-Way Pulley 36T Black 49471 Tamiya TB Evolution IV Hub Carrier 4 Degree 51107

    They have the same shape and function as the existing white colored parts, the only difference being these are black-colored versions.

    *Compatible Chassis: Any TA05 chassis.

    Front Hub Carrier 4 Degree Caster. Usable with Reversible Light Weight Suspension.
    Tamiya TRF501X K Parts Bearing Holder 51278 Tamiya Red Plated 2-Piece 6 Spoke Wheels 26mm Width + 2 Offset 54551 Tamiya Red Plated 2-Piece 6 Spoke Wheels 26mm Width + 4 Offset 54552

    Jazz up your 1:10 scale touring car model with these new 2-piece wheels! They feature a stylish 6-spoke design, with the silver-color metal plated rims complemented by a red metal-plated cap and spokes.

    • Wheels are 26mm wide, and compatible with any tires of the same width.
    • Each set includes 2 wheels

    Compatible with all 1:10 touring car models.

    Jazz up your 1:10 scale touring car model with these new 2-piece wheels! They feature a stylish 6-spoke design, with the silver-color metal plated rims complemented by a red metal-plated cap and spokes.

    • Wheels are 26mm wide, and compatible with any tires of the same width.
    • Each set includes 2 wheels

    Compatible with all 1:10 touring car models.