Home > All Brands > TAMIYA > TNX 5.2R TGM-04
Sort By:
Page of 1
Tamiya 5mm Ball Connector for 43514 4pcs 9804205 Tamiya GP Head Gasket for 43530 TNX 5.2R 7684410 Tamiya GP Screw Set for 43530 TNX 5.2R 7684423
No Original Packaging.

Usable with:
43514 Buggy Nitro Thunder NDF01.
Tamiya GP O Ring for 43530 TNX 5.2R 7684424 Tamiya GP Piston Pin for 43530 TNX 5.2R 7684408 Tamiya GP Collar for 43530 TNX 5.2R 7684422
Tamiya GP P Pin Retainer for 43530 TNX 5.2R 7684409 Tamiya GP Retainer for 43530 TNX 5.2R 7684418 Tamiya GP Wheel Axle Left / Right for 43530 TNX 5.2R 9804270
Tamiya GP Flywheel for 43530 TNX 5.2R 3454377 Tamiya GP Engine Mount for 43530 TNX 5.2R 2pcs 9804275 Tamiya GP A Parts for 43530 TNX 5.2R 0004457
Tamiya GP Crankshaft Bearing for 43530 TNX 5.2R Front 7684411 Tamiya GP Upright for 43530 TNX 5.2R 0440242 Tamiya GP Differential Gear Bag for 43530 TNX 5.2R 9404698
Tamiya GP Wheels for 43530 TNX 5.2R 0554005 Tamiya TGM-04 Spring for 8 Damper Suspension 8pcs 53946 Tamiya GP Damper Parts Bag for 43530 TNX 5.2R 9404697
A set of standard oil damper cylinders with soft springs (red) for the TGM-04 TNX5.2R. These soft springs are the ideal set-up for the 8 damper (dual shock) suspension.

Tamiya TNX Terra Crusher Gear Case Gear 2pcs 0554002 933408 Tamiya GP Inner Head for 43530 TNX 5.2R 7684406 Tamiya GP Backplate for 43530 TNX 5.2R 7684414
Tamiya GP Connecting Rod for 43530 TNX 5.2R 7684407 Tamiya TGM-04 Zerol Bevel & Ring Gear 53950 Tamiya GP Crankshaft Bearing for 43530 TNX 5.2R Rear 7684412
This special type of spiral bevel gear features curving teeth for higher strength and efficiency than straight bevel gear. Use in place of kit included straight bevel gear.
Compatible chassis: TGM-04, TGM-03
Tamiya GP Crankcase for 43530 TNX 5.2R 7684402 Tamiya GP Starter Shaft for 43530 TNX 5.2R 7684413 Tamiya GP Cylinder / Piston for 43530 TNX 5.2R 684404