Home > All Brands > TAMIYA > TA05 / TA05R
Tamiya TA-05 TA-05R Chassis Parts
Sort By:
Page of 5
Tamiya Silver Coil Spring 2pcs 9805699
This is the pair of Tamiya Silver Coil Spring.
Spring Rate is between the Blue and Yellow Springs from Tamiya 53440 ON-ROAD Tuned Hard Spring Set.

This is the pair of Tamiya Silver Coil Spring.

Spring Rate is between the Blue and Yellow Springs from Tamiya 53440 ON-ROAD Tuned Hard Spring Set.

Tamiya TRF Damper Oil Seal 4pcs 53576
These damper oil seals are direct replacements for Tamiya TRF touring car dampers. Racer Tip: Adding o-rings or foam bushings between the rubber oil seal and plastic damper cap will yield different damping effects. No Original Packaging. No Original Packaging.

Usable with:
43514 Buggy Nitro Thunder NDF01.
Tamiya TB Evolution IV Hub Carrier 2 Degree 51106 Tamiya TRF Damper Shaft Guide Grooved 4pcs 84292 Tamiya Ultra Hard Spring 53636

* No Original Packaging.

Front Hub Carrier 2 Degree Caster. Usable with Reversible Light Weight Suspension.

Usable With:

  • Tamiya TRF Damper
  • DF-03 Aluminum Damper Set
  • M-Chassis Aluminum Damper Set
  • Hotshot (2007)
  • Avante (2011)

Spec:

  • Inner Diameter: 2.8mm
  • Outer Diameter: 6.54mm
  • Thickness: 2.1mm
Tamiya 3mm Lock Nut 9805991
Usable with: 58345 Ferrari F430 TA05.

Fit Tamiya TA06, TA05 & TRF417 Gear Diff Unit.

Usable with: 49400 Porsche Turbo RSR Type 934.

Ball-Head King Pin for TB Evo 4/MS, TRF 415MS and usable with Reversible Light Weight Suspension Kit.

Dish, clear smoke colored plastic 24 mm width wheels. Limited edition
Tamiya Gear Differential Shim Set 54589

Get your gear differential set up exactly how you want
it! This handy shim set features 2 different thicknesses of shim (0.2 and 0.3mm)
to allow fine adjustment of the bevels in your gear diff.



Note: These shims are
meant to be used in Tamiya oil-filled gear differential units employed in 4WD
touring cars and 4WD off-road buggies.



Set Contents:



  • 5x10x0.2mm Shim x4
  • 5x10x0.3mm Shim x4

  • This diff pulley features number of gear teeth reduced by half from 36T to 18T, for wider gear pitch. This unique design developed by Tamiya greatly reduces belt resistance and improves transmission efficiency.

    Cross Joint from Tamiya Item 53500.

    Usable with: 49175 TA04 Works Chassis Kit

    2 pieces of Ball Diff Spring for Most Tamiya Chassis.

    This newly-designed body mount extension piece and snap pin set allows you to extend body mounts on your RC model car. They are intended to be used on those body posts which have been shortened for use with other bodies. They are compatible with a wide range of major Tamiya touring car and M-Chassis models.

  • Contains 5.5mm Body Mount Extension x4, 6mm and 7mm Snap Pins x4
  • Usable with 5.5-6mm diameter body mounts.
  • Compatible with TT-01, TT-02, TA05, TA06, TB-03, TB-04, XV-01, FF-03, M-05 and M-06 chassis body mounts.

  • For Most Tamiya Touring Car Diff. Join. with 2x25mm Diff Cap Screw.