Home > All Brands > PRO-LINE
Sort By:
Page of 1

Pro-Line Velocity Wide Wheels for the front of the Associated RC10B4 buggy.

FEATURES:

  • Tough / lightweight
  • Available in white or yellow for the front or rear
  • Stylish Pro-Line flame logo molded to wheel surface
  • Includes Two yellow Velocity Wide front dish wheels for the Associated RC10B4
  • SPECS: Width: .97" (24.6mm) Diameter: 2.2"

Proline 1:8 scale Replacement Air Filter Foams for the Proline Low Profile Air Filter Kit, PROC6118.

Includes 4 pcs. replacement filters

FEATURES:

  • M3 (soft) tire compound
  • 4 rib design for better traction
  • Foam inserts included

SPECS:

  • Inside tire diameter: 2.2 Inch
  • Outside tire diameter: 2.9 Inch
For 1:16 E-REVO, 1:16 Summit, Savage XS Flux Front & Rear and 1:10 Buggy Rear

FEATURES:

  • Fits the rear of 1/10 scale buggies and the 1/16 scale Traxxas Revo front and rear
  • Increases traction on concrete, blacktop and ultra hard packed surfaces
  • Deep V-tread whisks away dirt and dust for optimal traction
  • Low profile sidewall for good cornering performance
  • M2 medium compound
  • Includes Two Road Rage M2 Medium Street Tires and two Foam Inserts

SPECS:

  • Height: 3.45" (88mm)
  • Width: 1.50" (38mm)
  • Mounting Bead: 2.2" (56mm)
  • Weight: 1.5oz (42g)

Proline High Downforce Wing for 1/8 scale Buggies and Trucks

Provides more downforce at the rear wheels for better traction

Fits all 1:8 scale buggies and trucks

Constructed of plastic, white in color

Tire Features:

  • 2000 IFMAR World Champion winning design
  • Pro-Line'square-lug technology
  • Made from M3 (Soft) compounds

What's included:

  • Crime Fighter tires (2 pcs.)
  • Pro-Line Decal
FEATURES:
  • Fits Traxxas Slash, Slash 4x4, Slayer, Associated SC10, and HPI Blitz front or rear
  • Inner and outer radius rib tread for increased corner holding and predictable side-bite
  • Internal carcass webbing resists tire expansion under acceleration and deceleration
  • Internal sidewall ribbing maintains sidewall structure in extreme traction conditions for greater corner control
  • MX (Blue Groove) compound
  • Package Includes Two 2.2"/3.0" SC Suburbs MX Tires
  • SPECS: Diameter: 4.25" (108mm) Width: 1.69" (43mm) Inner diameter: 2.2" (55.88mm)

Pro-Line Racing Yellow 1/8 scale Velocity V2 Buggy Wheels.

FEATURES:

  • Smooth, flat yellow face for better aerodynamics
  • Fits 17mm, 1/8 scale front and rear hubs

INCLUDES:

  • Four Wheels
  • One Small Proline Decal

SPECS:

  • Tire Bead Diameter: 87.75mm
  • Width: 42mm
  • Axle Hole Diameter: 12mm
  • Hex Size: 17mm

*Fits Team Associated B44.1 only. Will not fit B44 or BJ4 without modifications

FEATURES:

  • Constructed of molded Clear Lexan
  • Cab forward design and low profile rear deck
  • Super low styling for the lowest center of gravity possible
  • Package Includes B44.1 Clear BullDog Body, Under Tray and Wing, Decal Sheet and Window Mask
  • SPECS: Length: 11" (279mm) Width: 5" (127mm) Height: 2.5" (63mm)

The ultimate crime in 1:8 Off-Road Racing is when you don't have enough traction to power, that's when you need to reach for Crime Fighter.

Pro-Line's new Crime Fighter off-road treaded front or rear 1:8 buggy tires take performance to the next level. This newly developed 1:8 carcass combined with diamond edge tread provides aggressive traction and superior performance on off-road 1:8 buggies. If you've been faced with track conditions that remind you of go-carting on a slick track then M3 compound is for you. It's specially formulated to give you the most out of your car in the most extreme conditions. The soft compound allows the tread and carcass to flex adhering to the surface below.

Tire Features:

  • 2000 IFMAR World Champion winning design
  • Pro-Line'square-lug technology
  • Durable, long-lasting molded foams included
  • Made from M3 (Soft) compounds

What's included:

  • Crime Fighter tires (2 pcs)
  • Molded Foam Inserts (2 pcs)

Tire Features:

  • Unsurpassed forward bite
  • Tapered outer pins resist rut catching
  • Made from M3 (Soft) compounds

What's included:

  • Bow-Tie tires (2 pcs)
  • Molded Foam Inserts (2 pcs)
  • Pro-Line Decal

Tire Features:

  • World Champion winning design & 2009 Nitrocross Champion
  • Pro-Line'square-lug technology
  • Durable, long-lasting molded foams included
  • Made from M3 (Soft) compounds

What's included:

  • Hole Shot tires (2 pcs)
  • Molded Foam Inserts (2 pcs)

Tire Features:

  • Lug size is perfect for a variety of surfaces
  • Lug spacing optimizes traction and tread longevity
  • World Champion molded foam insert included
  • For use on standard or V2 size wheels
  • Made from M3 (Soft) compounds

What's included:

  • Revolver tires (2 pcs)
  • Molded Foam Inserts (2 pcs)

The Pro-Line Bow-Tie SC 2.2"/3.0" M2 Tires for the 2nd Generation Traxxas Slash, Slash 4x4, Slayer, and Associated SC10, SCRT10, Ultima and Blitz.

FEATURES:

  • Fits front or rear
  • Medium hardness M2 compound
  • Bow-Tie center tread provides unmatched forward bite
  • Molded outer sidewall internal ribbing for additional sidewall support
  • High density/long-lasting foam inserts included

SPECS:

  • Height: 4.26" (108mm)
  • Width: 1.71" (43mm)
  • Mounting Bead: 2.2"(56mm)Outer x 3.0"(76mm)Inner
PRO-LINE Pit Apron 9914-00
Our Price: US$29.00
For SC Trucks and SC Buggies Front or Rear.

What's included:

  • Street Fighter SC 2.2"/3.0" Left Tire (1 pc)
  • Street Fighter SC 2.2"/3.0" Right Tire (1 pc)
  • Closed Cell Foam (2 pcs)

Fit On:

  • Mugen MBX-5, ProSpec 5R
  • XRay XB8

FEATURES:

  • 65% Polyester, 35% cotton
  • Black in color with white Pro-Line Logo
  • One size fits all Two pockets

Introducing the Caliber for 1:8 buggies. Step-pin technology collides with small pin technology to bring you a tire tread that is versatile and long-lasting.

Tire Features:

  • Dual-stage pin design for exceptional tread life
  • Small top pin for light to heavy loose dirt
  • Base pin extraordinary on hard-packed/blue-groove surfaces
  • Square-lug technology throughout the tread design
  • Directional tread for two different handling characteristics: Y forward (sidewall marked with an arrow) = more forward bite and better wear. Y in reverse = better in loamier/wet conditions.
  • Internal carcass ribbing for reduced tire expansion under acceleration
  • World Championship molded foam inserts included
  • Available in World Championship/extremely proprietary XTR (Firm), M2 (Medium), and M3 (Soft) compounds
  • Super true/balanced finish
  • Made in the USA

Pre-mounted Features:

  • Mounted to Pro-Line Velocity V2 Wheels
  • Adhered with the highest strength Cyanoacrylate (CA) glue
  • Super true finish and virtually no balance necessary

What's included:

  • Pre-mounted Caliber tires (2 pcs)
A pair of Proline 1:8 Scale Revolver M2 Compound Tires mounted to V3 White Buggy Wheels.

FEATURES:
  • Rubber Composition
  • M2 compond offers great steering and is especially good in bumpy conditions
  • White V3 Buggy Wheels
  • Fits 1:8 Scale Buggies Front or Rear
INCLUDES:
  • Two Revolver M2 Compound Tires on V3 White Buggy Wheels