Home > All Brands > TAMIYA > TT01 / TT01D / TT01E / TT01R
Tamiya TT01 Chassis Parts, Hop Ups
Sort By:
Page of 4
Tamiya TRF Short Damper Spring Extra Hard 2pcs 53633 Tamiya TRF Short Damper Spring Soft 2pcs 53630 Tamiya Plastic Servo Horn DF02 TT01 Q Parts 51079
Tamiya Silver Coil Spring 2pcs 9805699
This is the pair of Tamiya Silver Coil Spring.
Spring Rate is between the Blue and Yellow Springs from Tamiya 53440 ON-ROAD Tuned Hard Spring Set. Tamiya TRF Damper Oil Seal 4pcs 53576 Tamiya 5mm Ball Connector for 43514 4pcs 9804205

This is the pair of Tamiya Silver Coil Spring.

Spring Rate is between the Blue and Yellow Springs from Tamiya 53440 ON-ROAD Tuned Hard Spring Set.

These damper oil seals are direct replacements for Tamiya TRF touring car dampers. Racer Tip: Adding o-rings or foam bushings between the rubber oil seal and plastic damper cap will yield different damping effects. No Original Packaging.

Usable with:
43514 Buggy Nitro Thunder NDF01.
Tamiya 3x15mm Screw 4pcs 9805859 Tamiya 5mm Disc Spring 5pcs 84174 Tamiya 4mm Flange Locknut for 57602 9805557
  • 5mm Disc spring x 5pcs.
  • These disc springs are used with Item 54158 F104 Aluminum Diff Housing Set, Item 53663 Ball Differential Set (TT-01, TGS), and Item 53070 Manta Ray Ball Differential Set.
Tamiya Medium Narrow Dish Wheels Smoke Offset 0 49407 Tamiya 20T AV Pinion Gear 50356_20T Tamiya Bevel Gear Set TT01 TGS 51008
Dish, clear smoke colored plastic 24 mm width wheels. Limited edition

Tamiya 48 pitch metric 20 tooth pinion.

The number of teeth is stamped on the pinion so they cannot be confused.

They are made of aluminum.

Tamiya Steering Post for 58345 Ferrari F430 9808016 Tamiya TT01 Urethane Bumper for 58327 6275065 Tamiya TT01 P Parts Servo Horn 51005
Usable with: 58327 Mecedes Benz 190E Evolution II AMG.
Tamiya Urethane Bumper TT01 TGS 51019 Tamiya TRF Short Damper Spring Hard 2pcs 53632 Tamiya Body Mount Extension Set 54604

This newly-designed body mount extension piece and snap pin set allows you to extend body mounts on your RC model car. They are intended to be used on those body posts which have been shortened for use with other bodies. They are compatible with a wide range of major Tamiya touring car and M-Chassis models.

  • Contains 5.5mm Body Mount Extension x4, 6mm and 7mm Snap Pins x4
  • Usable with 5.5-6mm diameter body mounts.
  • Compatible with TT-01, TT-02, TA05, TA06, TB-03, TB-04, XV-01, FF-03, M-05 and M-06 chassis body mounts.

  • Tamiya Hard Coated 0.6 Aluminum Pinion Gear 22T TB01 49231 Tamiya TT01 Type E A Parts Upright 51318 Tamiya Urethane Bumper M TT01 TGS 51007

    This lightweight machined aluminum pinion gear is fluorine coated for reduced friction and wear. May require alternate spur size.

    Tamiya TRF Damper Piston 3-Hole 4pcs 53573 Tamiya Black 5-Spoke Wheel 2pcs 26mm Width ± 0 Offest 84271 Tamiya TT01 D Parts 9005719

    These pistons are made out of solid Teflon material to ensure smooth shock movement when used on Tamiya's world famous TRF dampers for touring cars.

    These are black-colored 5-Spoke Wheels for 1:10 scale R/C Tamiya touring cars that use the hex hub mounting specification.

    • Black 5-Spoke Wheel x 2pcs.
    • Compatible with 1:10 R/C Touring & Rally Cars.
    Tamiya TT01 Ball Differebtial Cup Joint for Universal Shaft 53806 Tamiya 3x22mm Low Friction Suspension Shaft DT02 TT01 Chassis 4pcs 54395 Tamiya Red Plated 2-Piece 6 Spoke Wheels 26mm Width + 2 Offset  54551

    53806 TT-01 Ball Differential Cup Joint for Universal Shaft

    To be used with TT-01 chassis fitted with Assembly Universal Shaft (TT-01, TA04) (item 53792) and ball differential.

  • Compatible chassis: TT-01

  • These shafts are used in place of 3x22mm screw pins and ensure secure attachment thanks to E-rings.

    The shaft also features a low-friction coating for smoother suspension movement.

    • Low-Friction Shaft x 4
    • E-rings included.
    • Compatible with DT-02, TT-01, and WR-02 chassis.

    Jazz up your 1:10 scale touring car model with these new 2-piece wheels! They feature a stylish 6-spoke design, with the silver-color metal plated rims complemented by a red metal-plated cap and spokes.

    • Wheels are 26mm wide, and compatible with any tires of the same width.
    • Each set includes 2 wheels

    Compatible with all 1:10 touring car models.

    Tamiya Red Plated 2-Piece 6 Spoke Wheels 26mm Width + 4 Offset 54552 Tamiya Red Plated 2-Piece 6 Spoke Wheels 26mm Width + 6 Offset 54553 Tamiya TRF Damper Piston 2-Hole 4pcs 53572

    Jazz up your 1:10 scale touring car model with these new 2-piece wheels! They feature a stylish 6-spoke design, with the silver-color metal plated rims complemented by a red metal-plated cap and spokes.

    • Wheels are 26mm wide, and compatible with any tires of the same width.
    • Each set includes 2 wheels

    Compatible with all 1:10 touring car models.

    Jazz up your 1:10 scale touring car model with these new 2-piece wheels! They feature a stylish 6-spoke design, with the silver-color metal plated rims complemented by a red metal-plated cap and spokes.

    • Wheels are 26mm wide, and compatible with any tires of the same width.
    • Each set includes 2 wheels

    Compatible with all 1:10 touring car models.

    These pistons are made out of solid Teflon material to ensure smooth shock movement when used on Tamiya's world famous TRF dampers for touring cars.