Home > All Brands > TAMIYA > M05 / M05S / M05 PRO / M05Ra
Sort By:
Page of 5
Tamiya TRF Damper Oil Seal 4pcs 53576
These damper oil seals are direct replacements for Tamiya TRF touring car dampers. Racer Tip: Adding o-rings or foam bushings between the rubber oil seal and plastic damper cap will yield different damping effects.
No Original Packaging.

Usable with:
43514 Buggy Nitro Thunder NDF01.
Tamiya TRF Damper Shaft Guide Grooved 4pcs 84292 Tamiya GP Short Damper Spring Hard 53751

Usable With:

  • Tamiya TRF Damper
  • DF-03 Aluminum Damper Set
  • M-Chassis Aluminum Damper Set
  • Hotshot (2007)
  • Avante (2011)

Spec:

  • Inner Diameter: 2.8mm
  • Outer Diameter: 6.54mm
  • Thickness: 2.1mm

Designed for wider range of front suspension settings.

For use with 1:10 scale glow engine R/C cars.

Also fit on M03 New Style Suspension King-Pin.

Tamiya GP Short Damper Spring Medium 53749

Set up your M-Chassis car so it better meets the requirements of the driving surface or even your driving style. These super hard tire inner sponges are one step harder than item 53255 (60D Hard Inner Sponge set)

Specifications:

  • Super hard inner sponges are well-suited for hot track conditions, and high speed circuits.
  • Package contains inner sponges to complete 4 tires.  
  • Compatible with all M-Chassis cars.
For: Tamiya M03, M04, M05, M05 Ver.II, M06, FF02, F103GT Chassis, HPI Formula 10

RC GP Short Damper Spring (Medium)

Designed for wider range of front suspension settings.

Tamiya Short Damper Spring Soft 53748

1:10 Scale glow engine R/C short damper spring (Soft) Designed for wider range of front suspension settings.

For use with 1:10 scale glow engine R/C cars.

Usable with: 57602 Voltec Fighter 4WD.

Compatible With:

  • 3RACING Sakura FF
  • 3RACING Sakura FGX
  • 3RACING Sakura XI
  • 3RACING Sakura Zero
  • 3RACING Sakura Zero S (SAK-65's replacement parts)
  • Tamiya FF03
  • Tamiya M05, M06 PRO 3Racing Gear Diff
These are the Yeah Racing Body Protect Sponge Pad (BK) (5mm inner, 1mm & 0.6mm thickness) for Tamiya M03, Yokomo series cars.

For: Tamiya M03, Yokomo series cars
  • Thickness: 0.6mm(4Pcs) & 1.0mm (4Pcs)
  • Inner: 5mm

  • Tamiya 48 pitch metric 20 tooth pinion.

    The number of teeth is stamped on the pinion so they cannot be confused.

    They are made of aluminum.

    For: Tamiya M05
    Tamiya Differential Bevel Gear Set 50602

    Hard Foam inserts for the 60D Tamiya Tires.

    Includes: 4 pcs of foam inserts.