|
|
|
|
|
|
|
|
|
|
|
|
These damper oil seals are direct replacements for Tamiya TRF touring car dampers. Racer Tip: Adding o-rings or foam bushings between the rubber oil seal and plastic damper cap will yield different damping effects.
|
For: Tamiya F104, F104X1, F104 PRO, F103GT
|
|
|
|
|
|
|
|
|
|
|
|
|
This spring holder replaces kit-standard parts to allow more precision of roll spring placement, thereby facilitating improved roll damper performance and reduced wear and tear on the joint. Contains Aluminum roll spring holders x2 Compatible with F104 ver.II & RM-01 chassis
|
- 5mm Disc spring x 5pcs.
- These disc springs are used with Item 54158 F104 Aluminum Diff Housing Set, Item 53663 Ball Differential Set (TT-01, TGS), and Item 53070 Manta Ray Ball Differential Set.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Friction Damper Post x 1pc.
Adjuster Nut x 1pc.
Friction Damper Spring x 2pcs.
Friction Damper Pole x 1pc.
Screws, nuts and washer also included.
Compatible with F103 and F104 series chassis
machines.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For: Tamiya F104 Pro
Include:Aluminum Rear Body Post (2 Pcs)Body Clips (2 Pcs)O Ring (2 Pcs)
|
These pistons are made out of solid Teflon
material to ensure smooth shock movement when used on Tamiya's world famous TRF
dampers for touring cars.
|
The set contains 4 different springs to
allow fine pitch damper setting adjustments to match the characteristics of a
particular circuit.
Specs and Features
- Pitch Springs (Super Soft, Soft, Medium, Hard) x 1pc. each.
- Compatible with RM-01 chassis.
- Also Compatible with F103 & F104 Chassis installed with
Tamiya 54341 Alu. Pitch Damper Set
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.4 Module spur gear features finer teeth than standard
kit-included 0.6 module gear, allowing minute ratio adjustment to improve
acceleration and efficiency. Gear contains molybdenum for reduced friction
resistance.
*Compatible chassis: Mesh with #53101 to #53101 (0.4 pinion
gear) to use with F104, F103 and C Car chassis
|
These pistons are made out of solid Teflon
material to ensure smooth shock movement when used on Tamiya's world famous TRF
dampers for touring cars.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Usable with F103 & F104 Chassis.
|
|
|
|
|
|
|
|
|
|
|
|
|
Make your 1/10 R/C Ferrari F60 stand out with Tamiya's
metal plated wheels. The wheels feature a matt finish.
Specs & Features
Front tires x 2pcs.
Rear tires x 2pcs.
Tires not included.
|
* For Form Tires only.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Specs & Features:
- Set includes two front and two rear wheels for rubber tire use.
- Rubber tires are not included.
*Cannot be used with sponge tires.
|
Usable with:
- F103RS
- F103RX
- F103RM
- F104W
|
Usable with:
- F103RS
- F103RX
- F103RM
- F104W
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This item has greater durability and is
more resistant to damage from sand and dust than the standard kit supplied king
pins. Comes in an eye catching gold color.
- Titanium coated King Pin x 2pcs.
- Can be used with F104 chassis machines.
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a protective film designed to be used under the main chassis of your favorite R/C vehicle. It's highly adhesive and when stuck to the chassis it provides long-lasting protection against scratches by contacting track surface, and thanks to its transparency will not detract from the model’s appearance.
- Thickness: 0.3mm
- Contains 180x330mm sheets x2
|
For: Tamiya F104 Pro
Include:Aluminum T-Bar Mount (1 Pc)Screws (4 Pcs)
|
|
|