This is the DuraTrax Pit Tech Camber Gauge.

FEATURES: Easily and accurately measures camber settings in 1° increments from 10° positive to 10° negative Ideal for on-road and off-road cars and trucks Thumb wheel locks gauge settings securely for precise adjusments Includes tips for setting the camber to achieve maximum cornering performance on any type of track design or surface Constructed of black plastic

INCLUDES: One DuraTrax Pit Tech Camber Gauge

REQUIRES: Adjusting gauge to desired setting, placing gauge against wheel or tire and adjusting camber linkages until wheel is aligned with the gauge at the top and bottom

This is a Standard Slot-Head Engine Tuning Screwdriver 3.2 x 120mm.

FEATURES:

• Durable, magnetized, heat-treated, Black tip tops off the precision ground Chrome Vanadium steel shaft.
• Comfortable handles are made of polypropylene, with a rubberized finish that enables modelers to get a firm grip.
• Top of handle has a hexagonal design to keep it from rolling away when laid on a work surface.
• Ideal for tuning/adjusting High- /Low-Speed needle valves and throttle stop screws on glow powered radio controlled engines.
• Shrink-wrapped to a header card that hangs easily from a pegboard and is labeled for quick identification.

DuraTrax Charge Lead with Male Bullet and Traxxas Female Connectors.

FEATURES: Charges a battery with a Traxxas Male Connector

INCLUDES: One DuraTrax Charge Lead with Male Bullet and Traxxas Female Connectors

This is the C-Size DuraTrax Ultimate Glo-Starter If one glo-starter battery goes dead, this system allows you to change batteries quickly at the field or track.

FEATURES: Versatile system consists of a glo-starter with a high impact poly- styrene case that holds either a rechargeable NiCd (included) or a replaceable alkaline cell (not included). Twist-and-lock socket attaches the starter securely onto glow plug with spring action strength. 90 day limited warranty (USA and Canada only)

INCLUDES: One C-Size DuraTrax Ultimate Glo-Starter One sub-C NiCd battery One sub-C adapter cup One AC charger (US Standard)

REQUIRES: Charging the NiCd battery initially at 12-14 hours. Future charging time is approximately 10 hours (do not attempt to charge alkaline batteries).

SPECS: Glow Starter- Overall length: 4-3/8" (111mm) Length of shaft: 1-5/8" (41mm) Diameter of shaft: 3/8" (10mm) Charger- Input: 110-120V AC 60Hz, US Standard AC Output: 1.25V DC 150mA

COMMENTS: Charge only the included NiCd battery. Do not attempt to charge the glow starter when alkaline battery is installed, damage to the charger and battery may occur.