Home > All Brands > TAMIYA > M03 / M03L / M03M / M03R / M04
Sort By:
Page of 4
Tamiya TRF Damper Oil Seal 4pcs 53576
These damper oil seals are direct replacements for Tamiya TRF touring car dampers. Racer Tip: Adding o-rings or foam bushings between the rubber oil seal and plastic damper cap will yield different damping effects.
No Original Packaging.

Usable with:
43514 Buggy Nitro Thunder NDF01.
Tamiya TRF Damper Shaft Guide Grooved 4pcs 84292 Tamiya GP Short Damper Spring Hard 53751

Usable With:

  • Tamiya TRF Damper
  • DF-03 Aluminum Damper Set
  • M-Chassis Aluminum Damper Set
  • Hotshot (2007)
  • Avante (2011)

Spec:

  • Inner Diameter: 2.8mm
  • Outer Diameter: 6.54mm
  • Thickness: 2.1mm

Designed for wider range of front suspension settings.

For use with 1:10 scale glow engine R/C cars.

Also fit on M03 New Style Suspension King-Pin.

Tamiya Plastic Bearing Bag 84/62/70 10pcs 0555015

Set up your M-Chassis car so it better meets the requirements of the driving surface or even your driving style. These super hard tire inner sponges are one step harder than item 53255 (60D Hard Inner Sponge set)

Specifications:

  • Super hard inner sponges are well-suited for hot track conditions, and high speed circuits.
  • Package contains inner sponges to complete 4 tires.  
  • Compatible with all M-Chassis cars.
Tamiya GP Short Damper Spring Medium 53749 Tamiya Short Damper Spring Soft 53748
For: Tamiya M03, M04, M05, M05 Ver.II, M06, FF02, F103GT Chassis, HPI Formula 10

RC GP Short Damper Spring (Medium)

Designed for wider range of front suspension settings.

1:10 Scale glow engine R/C short damper spring (Soft) Designed for wider range of front suspension settings.

For use with 1:10 scale glow engine R/C cars.

Usable with: 57602 Voltec Fighter 4WD.

Tamiya 48 pitch metric 17 tooth Pinon gear.

The number of teeth is stamped on the pinion so they cannot be confused which is which.

They are made of aluminum.

INCLUDES:

17T pinion gear X 1

1- set screw

Tamiya Differential Bevel Gear Set 50602

Tamiya 48 pitch metric 20 tooth pinion.

The number of teeth is stamped on the pinion so they cannot be confused.

They are made of aluminum.

Hard Foam inserts for the 60D Tamiya Tires.

Includes: 4 pcs of foam inserts.

1:10 Scale glow engine R/C short damper spring (Extra-hard) Designed for wider range of front suspension settings.

For use with 1:10 scale glow engine R/C cars.