Home > All Brands > TAMIYA > M-Chassis
Sort By:
Page of 5
Tamiya 5mm Adjuster 6pcs 50596 Tamiya TRF Short Damper Spring Extra Hard 2pcs 53633 Tamiya TRF Short Damper Spring Soft 2pcs 53630
Tamiya TRF Damper Oil Seal 4pcs 53576 Tamiya 3x32mm Screw Pin 4pcs 9805756 Tamiya 5x21mm Shaft 3555048
These damper oil seals are direct replacements for Tamiya TRF touring car dampers. Racer Tip: Adding o-rings or foam bushings between the rubber oil seal and plastic damper cap will yield different damping effects.
Tamiya 5x40mm Shaft 3550027 Tamiya 3x14mm Step Tapping Screw 5pcs 50582 Tamiya TRF Damper Shaft Guide Grooved 4pcs 84292

Usable With:

  • Tamiya TRF Damper
  • DF-03 Aluminum Damper Set
  • M-Chassis Aluminum Damper Set
  • Hotshot (2007)
  • Avante (2011)

Spec:

  • Inner Diameter: 2.8mm
  • Outer Diameter: 6.54mm
  • Thickness: 2.1mm
Tamiya GP Short Damper Spring Hard 53751 Tamiya TA04 King Pin Set 50882 Tamiya Flanged Tube Short for 49417 M03R 4pcs 9804328

Designed for wider range of front suspension settings.

For use with 1:10 scale glow engine R/C cars.

Also fit on M03 New Style Suspension King-Pin.
Tamiya 2x10mm Shaft 10pcs 50594 Tamiya Plastic Bearing Bag 84/62/70 10pcs 0555015 Tamiya GP Short Damper Spring Medium 53749

RC GP Short Damper Spring (Medium)

Designed for wider range of front suspension settings.
Tamiya Short Damper Spring Soft 53748 Tamiya 4mm Flange Locknut for 57602 9805557 Tamiya 4x11.5mm Step Screw 5pcs 84175

1:10 Scale glow engine R/C short damper spring (Soft) Designed for wider range of front suspension settings.

For use with 1:10 scale glow engine R/C cars.
Tamiya 3x10mm Step Screw 5pcs 50579 Tamiya 3x18mm Step Screw 2pcs 9805945 Tamiya 3x89mm Threaded Shaft 2500016
Tamiya AV Pinion Gear 17T 50354_17T Tamiya 20T AV Pinion Gear 50356_20T Tamiya Sponge Tape for Urethane Bumper 54430

Tamiya 48 pitch metric 17 tooth Pinon gear.

The number of teeth is stamped on the pinion so they cannot be confused which is which.

They are made of aluminum.

INCLUDES:

17T pinion gear X 1

1- set screw

Tamiya 48 pitch metric 20 tooth pinion.

The number of teeth is stamped on the pinion so they cannot be confused.

They are made of aluminum.

Use this tape to fill the gap between the urethane bumper and the body. Better body fit helps improve handling performance, especially on the race track. It can also be applied to battery holders to enable a snug fit between the battery pack and the chassis.

Sponge Tape x10
Tamiya Differential Bevel Gear Set 50602 Tamiya Swing Shaft Protector 4pcs 53890 Tamiya 3x46mm Screw Pin 4pcs 9805976
Tamiya M-Chassis 60D Inner Sponge Set 50686 Tamiya Bevel Gear Set TT01 TGS 51008 Tamiya M-Chassis Inner Sponge 53204