Home > All Brands > TAMIYA > TGR
Tamiya TGR Chassis Parts, Hop Ups
Sort By:
Page of 1
Tamiya Silver Coil Spring 2pcs 9805699
This is the pair of Tamiya Silver Coil Spring.
Spring Rate is between the Blue and Yellow Springs from Tamiya 53440 ON-ROAD Tuned Hard Spring Set. Tamiya 5mm Ball Connector for 43514 4pcs 9804205 Tamiya GP 6mm Adjuster for 44030 TGR 0445749

This is the pair of Tamiya Silver Coil Spring.

Spring Rate is between the Blue and Yellow Springs from Tamiya 53440 ON-ROAD Tuned Hard Spring Set.

No Original Packaging.

Usable with:
43514 Buggy Nitro Thunder NDF01.
Tamiya TGR 100cc Fuel Tank 41048 Tamiya GP Support Plate for 44030 TGR 9805706 Tamiya Front Upright from Package 50903 2pcs 50903_OPEN
Usable with:
  • 44030 TGR Chassis Kit
  • 40032 TG10R Chassis Kit
  • TB-EVO, TB-EVO II Chassis Kit
Tamiya TGR F Parts Rear Upright 50908 Tamiya 6mm Aluminum Ball Nut Red 53639 Tamiya GP Wheel Hub for 44030 TGR 9805704
  • TGR
  • TG10 use with item 53430
  • TB-01
  • TB-EVOII
Tamiya TB01 TG10 Front Upright 2pcs 9335343 Tamiya TGR A Parts Gear Case 50903 Tamiya TGR D Parts Bulkhead 50906
Fits: TGR, TG10, TB-01.

Usable With:

  • 44030 TGR Chassis Kit
  • 40032 TG10R Chassis Kit
  • TB-EVO, TB-EVO II Chassis Kit
Tamiya GP Front Propeller for 44030 TGR 2594004 Tamiya TGX 2-Speed Transmission Clutch Shoe Set 53212 Tamiya GP Engine Mount for 44030 TGR 9805692

Usable With:

  • TGX-MK.1 Chassis Equipped with Tamiya part 53210
  • TG10-Mk.1 Chassis Equipped with Tamiya part 53359
  • TGR
  • TG10R
Tamiya GP Wheel Axle for 44030 TGR 9805691 Tamiya GP Gear Box Joint for 44030 TGR 9805686 Tamiya GP 2-Speed Shaft for 44030 TGR 9805685
Tamiya TGR TGX Slick Tire 2pcs 53419

For use Tamiya's TGR and TGX Mk.1 chassis cars.

Low-height tire contains a fiber belt, heightening durability and minimizing deformation.

Slick racing tires.

Provides extra-high grip even on oily running surfaces or during cornering.

Inner foam inserts are included.

Can be used on front or rear.

Includes Two Low-Height Reinforced Tires with Inner Sponge Inserts.

  • Inner Diameter: 2.0" (50mm)
  • Outer Diameter: 2.8" (71mm)
  • Width: 1.3" (33mm)