Home > All Brands > TAMIYA > TB01
Tamiya TB-01 Chassis Parts, Hop Ups
Sort By:
Page of 1
Tamiya TRF Damper Oil Seal 4pcs 53576 Tamiya 5mm Ball Connector for 43514 4pcs 9804205 Tamiya 3x10mm Step Screw 5pcs 50579
These damper oil seals are direct replacements for Tamiya TRF touring car dampers. Racer Tip: Adding o-rings or foam bushings between the rubber oil seal and plastic damper cap will yield different damping effects. No Original Packaging.

Usable with:
43514 Buggy Nitro Thunder NDF01.
Tamiya Medium Narrow Dish Wheels Smoke Offset 0 49407 Tamiya TB Evolution Bevel Pinion Gear 50911 Tamiya Differential Bevel Gear Set 50602
Dish, clear smoke colored plastic 24 mm width wheels. Limited edition
Tamiya Hard Coated 0.6 Aluminum Pinion Gear 22T TB01 49231 Tamiya TG10 Bumper 50803 Tamiya TG10 Body Mount B3-B12, B16 50852
Tamiya TG10 Bumper 50803
Our Price: US$5.00

This lightweight machined aluminum pinion gear is fluorine coated for reduced friction and wear. May require alternate spur size.

Tamiya TG10 Front Hub Carrier 50817 Tamiya TB01 0.4 Spur Gear 72T 53413 Tamiya TGR F Parts Rear Upright 50908

  • TG10 Mk.1
  • TB-01 * Cannot be used with 53430
  • TGR
  • TG10 use with item 53430
  • TB-01
  • TB-EVOII
Tamiya Red Plated 2-Piece 6 Spoke Wheels 26mm Width + 2 Offset  54551 Tamiya Red Plated 2-Piece 6 Spoke Wheels 26mm Width + 4 Offset 54552 Tamiya Red Plated 2-Piece 6 Spoke Wheels 26mm Width + 6 Offset 54553

Jazz up your 1:10 scale touring car model with these new 2-piece wheels! They feature a stylish 6-spoke design, with the silver-color metal plated rims complemented by a red metal-plated cap and spokes.

  • Wheels are 26mm wide, and compatible with any tires of the same width.
  • Each set includes 2 wheels

Compatible with all 1:10 touring car models.

Jazz up your 1:10 scale touring car model with these new 2-piece wheels! They feature a stylish 6-spoke design, with the silver-color metal plated rims complemented by a red metal-plated cap and spokes.

  • Wheels are 26mm wide, and compatible with any tires of the same width.
  • Each set includes 2 wheels

Compatible with all 1:10 touring car models.

Jazz up your 1:10 scale touring car model with these new 2-piece wheels! They feature a stylish 6-spoke design, with the silver-color metal plated rims complemented by a red metal-plated cap and spokes.

  • Wheels are 26mm wide, and compatible with any tires of the same width.
  • Each set includes 2 wheels

Compatible with all 1:10 touring car models.

Tamiya 24T 25T AV Pinion Gear Set 50477 Tamiya TG10 Long Wheel Axle 2pcs 50808 Tamiya TB01 G Parts Gear 50860

  • TG10 Mk.1
  • TB-01 * Cannot be used with 53430
  • WR-02 Chassis
Tamiya TG10 Stabilizer Set 53354 Tamiya TB01 TG10 Front Upright 2pcs 9335343 Tamiya 3x18mm Aluminum Turnbuckle Shaft Black 84020

For:

  • TG10 Mk.1
  • TB-01
Fits: TGR, TG10, TB-01.

Tamiya TG10 Gear Case 50800 Tamiya Racing Wing Set 2 Hard Type 1mm 1:10 RC Car Touring Drift 84371 Tamiya 3x18mm Titanium Turnbuckle Shafts 2pcs 53525

This wing set is a reinforced version of Item 54494 Racing Wing Set 2. It includes two different shapes of wing; curved and straight - which can be used to adjust the downforce of your RC car model. The wings are made from 1.0mm thickness polycarbonate, as opposed to the 0.7mm thickness of those in Item 54494.

  • Curved wing x1
  • Straight wing x1
  • J Parts (wing stay) x1
  • Snap pins and O-rings necessary for attachment, plus attachment instructions.
Tamiya TT01 Aluminum Motor Heat Sink 53664 Tamiya On-Road Tuned Hard Spring Set Mica Blue 84325

Lower the Motor Temprature.

Fits:

  • TT-01 Chassis
  • TB-01 Chassis
  • TB Evo I, II & III

These on-road tuned springs feature a special Mica Blue color surface.

Each set contains Soft, Medium, Hard, and Extra Hard springs (2pcs. each) to allow fine setting adjustment of your favourite Tamiya Touring Car chassis according to the race track conditions.

Mica Blue Spring (Soft, Medium, Hard, Extra Hard / 2pcs each)

   
 
Tamiya TB-01 Chassis Parts, Hop Ups