Home > All Brands > TAMIYA > TA05 IFS / TA05 IFS-R
Tamiya TA05 TA-05 IFS IFS-R Chassis Parts
Sort By:
Page of 5
Tamiya Silver Coil Spring 2pcs 9805699
This is the pair of Tamiya Silver Coil Spring.
Spring Rate is between the Blue and Yellow Springs from Tamiya 53440 ON-ROAD Tuned Hard Spring Set.

This is the pair of Tamiya Silver Coil Spring.

Spring Rate is between the Blue and Yellow Springs from Tamiya 53440 ON-ROAD Tuned Hard Spring Set.

Tamiya TRF Damper Oil Seal 4pcs 53576 Tamiya TA05 IFS C Parts Front Upright 51296
These damper oil seals are direct replacements for Tamiya TRF touring car dampers. Racer Tip: Adding o-rings or foam bushings between the rubber oil seal and plastic damper cap will yield different damping effects.

This Front Upright shape is not same as the one come with TA05 IFS-R Chassis Kit. Please Order Tamiya 51332 for replacement.

Use with 5 X 9mm Bearings.

Original from Tamiya TA05-IFS Chassis Kit.

This Front Upright Shape is same as Tamiya Item 51103.

No Original Packaging.
Tamiya TRF Damper Shaft Guide Grooved 4pcs 84292 Tamiya Ultra Hard Spring 53636
No Original Packaging.

Usable with:
43514 Buggy Nitro Thunder NDF01.

Usable With:

  • Tamiya TRF Damper
  • DF-03 Aluminum Damper Set
  • M-Chassis Aluminum Damper Set
  • Hotshot (2007)
  • Avante (2011)

Spec:

  • Inner Diameter: 2.8mm
  • Outer Diameter: 6.54mm
  • Thickness: 2.1mm
Dish, clear smoke colored plastic 24 mm width wheels. Limited edition
Tamiya Gear Differential Shim Set 54589

Get your gear differential set up exactly how you want
it! This handy shim set features 2 different thicknesses of shim (0.2 and 0.3mm)
to allow fine adjustment of the bevels in your gear diff.



Note: These shims are
meant to be used in Tamiya oil-filled gear differential units employed in 4WD
touring cars and 4WD off-road buggies.



Set Contents:



  • 5x10x0.2mm Shim x4
  • 5x10x0.3mm Shim x4

  • This diff pulley features number of gear teeth reduced by half from 36T to 18T, for wider gear pitch. This unique design developed by Tamiya greatly reduces belt resistance and improves transmission efficiency.

    Original From Tamiya TA05-IFS Chassis Kit.
    Must used with 5 X 9mm Bearings.

    Cross Joint from Tamiya Item 53500.

    Usable with: 49175 TA04 Works Chassis Kit

    2 pieces of Ball Diff Spring for Most Tamiya Chassis.

    For Most Tamiya Touring Car Diff. Join. with 2x25mm Diff Cap Screw.

    This Option Part will be available as a limited edition event-only item for visitors to this autumn's Tokyo Hobby Show. It is a color variation of an existing gray-colored bumper (ITEM# 51073 TB- 02 Urethane Bumper S), and the new black color will enable the bumper to better blend in with the chassis for a more uniform appearance.

    *Compatible Chassis: All TA05 chassis except TA05 MS.

    Replace the stock rocker nuts with these durable anodized aluminum parts for weight savings and longer lasting performance. Set contains rocker nuts (x2) and 2.5mm E-rings (x2).

    *Compatible Chassis: TA05-IFS, TB03, FF03

    These new hub carriers are made from carbon fiber-reinforced resin material for increased durability. Tougher hub carriers also mean sharper steering response, giving the car better handling characteristics.

    *Compatible Chassis: TA05 Ver.2, TA05-IFS, TRF416, TRF417, TB03, TB Evo 5 MS, FF03

    These pistons are made out of solid Teflon material to ensure smooth shock movement when used on Tamiya's world famous TRF dampers for touring cars.