Home > All Brands > TAMIYA > TA05 Version II
Tamiya TA-05 Ver. II  Chassis Parts
Sort By:
Page of 4
Tamiya Silver Coil Spring 2pcs 9805699
This is the pair of Tamiya Silver Coil Spring.
Spring Rate is between the Blue and Yellow Springs from Tamiya 53440 ON-ROAD Tuned Hard Spring Set. Tamiya TRF Damper Oil Seal 4pcs 53576 Tamiya 5mm Ball Connector for 43514 4pcs 9804205

This is the pair of Tamiya Silver Coil Spring.

Spring Rate is between the Blue and Yellow Springs from Tamiya 53440 ON-ROAD Tuned Hard Spring Set.

These damper oil seals are direct replacements for Tamiya TRF touring car dampers. Racer Tip: Adding o-rings or foam bushings between the rubber oil seal and plastic damper cap will yield different damping effects. No Original Packaging.

Usable with:
43514 Buggy Nitro Thunder NDF01.
Tamiya TRF Damper Shaft Guide Grooved 4pcs 84292 Tamiya 4mm Flange Locknut for 57602 9805557 Tamiya TB03 E Parts Rear Upright 51354

Usable With:

  • Tamiya TRF Damper
  • DF-03 Aluminum Damper Set
  • M-Chassis Aluminum Damper Set
  • Hotshot (2007)
  • Avante (2011)

Spec:

  • Inner Diameter: 2.8mm
  • Outer Diameter: 6.54mm
  • Thickness: 2.1mm
TEAM ASSOCIATED Stealth Differential Lube 4cc ASC6591 TEAM ASSOCIATED Black Grease 4cc ASC6588 Tamiya Medium Narrow Dish Wheels Smoke Offset 0 49407

This grease is for the thrust balls ONLY (NOT the differential balls).

Dish, clear smoke colored plastic 24 mm width wheels. Limited edition
Tamiya Gear Differential Shim Set 54589 Tamiya 5mm Gear Differential O-Rings Red 8pcs 42259 Tamiya TA05 Spur Gear 70T 51215

Get your gear differential set up exactly how you want
it! This handy shim set features 2 different thicknesses of shim (0.2 and 0.3mm)
to allow fine adjustment of the bevels in your gear diff.



Note: These shims are
meant to be used in Tamiya oil-filled gear differential units employed in 4WD
touring cars and 4WD off-road buggies.



Set Contents:



  • 5x10x0.2mm Shim x4
  • 5x10x0.3mm Shim x4

  • These are 5mm O-rings designed to be used in many of Tamiya’s oil-filled sealed gear differentials like the ones’ found on the TA-05 option sealed gear set as well as the included sets found on the TA-06, XV-01 and TRF417 series of cars. The inner diameter of the O-ring is slightly smaller than the standard kit black O-ring. The smaller inner diameter O-ring better prevents oil from leaking out of the gear differential.

    • Set contains eight red O-rings.
    Tamiya Large Ball Differential Alloy Plate 54390 Tamiya C.V.A. Mini Shock Unit II V Parts Damper Collar 50598 Tamiya Differential Spring for 58261 TA04 PRO 9949299

    Item 51287 Large Ball Diff Plate was produced as the stock replacement diff ring part for many of Tamiya's R/C car chassis.

    This new option version has been produced with a more durable alloy material for more effective performance.

    • Large Ball Diff Plate x 2
    • Compatible with FF-03, TA05 ver.II, TRF511 and TRF 501 chassis machines
    2 pieces of Ball Diff Spring for Most Tamiya Chassis.
    Tamiya Body Mount Extension Set 54604 Tamiya 2x25mm Cap Screw 2pcs 9949350 Tamiya TA05 IFS Aluminum Rocker Nut 53992

    This newly-designed body mount extension piece and snap pin set allows you to extend body mounts on your RC model car. They are intended to be used on those body posts which have been shortened for use with other bodies. They are compatible with a wide range of major Tamiya touring car and M-Chassis models.

  • Contains 5.5mm Body Mount Extension x4, 6mm and 7mm Snap Pins x4
  • Usable with 5.5-6mm diameter body mounts.
  • Compatible with TT-01, TT-02, TA05, TA06, TB-03, TB-04, XV-01, FF-03, M-05 and M-06 chassis body mounts.

  • For Most Tamiya Touring Car Diff. Join. with 2x25mm Diff Cap Screw.

    Replace the stock rocker nuts with these durable anodized aluminum parts for weight savings and longer lasting performance. Set contains rocker nuts (x2) and 2.5mm E-rings (x2).

    *Compatible Chassis: TA05-IFS, TB03, FF03

    Tamiya TA06 Gear Differential Unit Bevel Gear Set 51460 Tamiya TB03 Lightweight Urethane Bumper 84049 Tamiya TA05 IFS Carbon Reinforced F Parts Hub Carrier 4 Degree 54031

    Bevel Gear Set for the Tamiya New Gear Differential.

    Fits the Tamiya TA06 and TA06 PRO differentials and the Tamiya Items 42197 & 54312.

    Fits:

    • TB-03
    • TRF416
    • TRF417
    • TRF415
    • TB-EVO 5
    • TA05 MS

    These new hub carriers are made from carbon fiber-reinforced resin material for increased durability. Tougher hub carriers also mean sharper steering response, giving the car better handling characteristics.

    *Compatible Chassis: TA05 Ver.2, TA05-IFS, TRF416, TRF417, TB03, TB Evo 5 MS, FF03

    Tamiya TRF Damper Piston 3-Hole 4pcs 53573 Tamiya 3x42mm Aluminum Turnbuckle Shaft Black 84022 Tamiya TA05 IFS N Parts Rocker Arm 51294

    These pistons are made out of solid Teflon material to ensure smooth shock movement when used on Tamiya's world famous TRF dampers for touring cars.

    Tamiya TRF416 E Parts Rear Upright 51333 Tamiya TB03 D Parts Suspension Arm 51353 Tamiya Red Plated 2-Piece 6 Spoke Wheels 26mm Width + 2 Offset  54551

    *This is from the latest shipment will fit on TRF417 New Style Universal Joint.

    * This is the Plastic Short Rev. Arm Set

    Jazz up your 1:10 scale touring car model with these new 2-piece wheels! They feature a stylish 6-spoke design, with the silver-color metal plated rims complemented by a red metal-plated cap and spokes.

    • Wheels are 26mm wide, and compatible with any tires of the same width.
    • Each set includes 2 wheels

    Compatible with all 1:10 touring car models.

    Tamiya Red Plated 2-Piece 6 Spoke Wheels 26mm Width + 4 Offset 54552 Tamiya Red Plated 2-Piece 6 Spoke Wheels 26mm Width + 6 Offset 54553 Tamiya 5x8mm Aluminum Hex Head Ball Connector 53907

    Jazz up your 1:10 scale touring car model with these new 2-piece wheels! They feature a stylish 6-spoke design, with the silver-color metal plated rims complemented by a red metal-plated cap and spokes.

    • Wheels are 26mm wide, and compatible with any tires of the same width.
    • Each set includes 2 wheels

    Compatible with all 1:10 touring car models.

    Jazz up your 1:10 scale touring car model with these new 2-piece wheels! They feature a stylish 6-spoke design, with the silver-color metal plated rims complemented by a red metal-plated cap and spokes.

    • Wheels are 26mm wide, and compatible with any tires of the same width.
    • Each set includes 2 wheels

    Compatible with all 1:10 touring car models.